关键性能
● 40-1218MHz operating frequency range |
● High linearity, 60dBc CTB/CSO 135 Channels @+20dBmV/ch |
● 41dB Gain at 55MHz;41.5dB Gain at 1218MHz |
● High dynamic gain range, 24dB Gain Control Range |
● Support 12dBm optical range Single supply, Single +5V Supply |
● Low power consumption, 180mA for one RF output at 5V supply voltage |
● Lead-free/RoHS compliant QFN4X4-24L package |
AGC1011 Digitally Controlled Variable Gain Amplifier
Sanland’s AGC1011 is a variable Gain Amplifier with digital Attenuator. The Amplifier has low noise and high linearity achieved through the use of 0.5um GaAs Enhancement-mode pHEMT process. It is housed in a miniature 4.0 x 4.0 mm 24-pin Quad-Flat-Non- Lead (QFN) package. It is designed for optimum use from 0.05GHz up to 1.2GHz. The compact footprint and low profile coupled with low noise, high gain and high linearity make the AGC1011 an ideal choice as a low noise amplifier for CATV network and FTTH network.
类型 | Downstream |
频率最小值(GHz) | 0.05 |
频率最大值(GHz) | 1.218 |
增益典型值((dB) | 41 |
OIP3(dB) | 34 |
S22(dB) | -15 |
NF(dB) | 0.5 |
电压(V) | 5V |
电流(mA) | 135 |
封装类型 | QFN |
RoHS | Yes |
Lead Free | Yes |
Halogen Free | Yes or No |
Major Applications
Electrical Characteristics For Application:
Parameter | Specification | Units | Notes | ||
Min | Typ. | Max | |||
Freq | 0.05 | 1.218 | GHz | 50-1.218GHz | |
Gain | - | 41 | - | dB | 50-1,218GHz |
Gain Control Range | - | 24 | - | dB | 0-24 |
P-1dB | - | 20.5 | - | dB | At 500MHz/5dBm |
OIP3 | - | 34 | - | dB | At 500MHz/5dBm |
Output return loss | - | -15 | - | dB | 50-1.218GHz |
NF | - | 0.5 | 0.69 | dB | At 500MHz/5dBm |
VDD | 5 | V | |||
IDD | 160 | 180 | 200 | mA | Vdd = 5.0V |
Test Conditions: VDD=5V, IDD=55mA Typ. OIP3 Tone Spacing=1MHz, Pout per ton=+5 dBm | |||||
TL=25℃, ZS=ZL=50 Ohms |
1. All measurements in a 75 Ohm system, unless otherwise specified.
2. Specified at maximum gain.
3. When the control voltage is changed, the attenuation is changed,Attenuation gain deviation is ±1.5dB