中文
English
français
Deutsch
русский
español
português
日本語
한국의
العربية
关键性能
| ● 0.04GHz - 1.2GHz operating frequency range |
| ● High linearity, 60dBc CTB/CSO 135 Channels @+20dBmV/ch |
| ● 36.5dB Gain at 55MHz；37dB Gain at 1000MHz |
| ● High dynamic gain range, 30dB Gain Control Range |
| ● Support 12dBm optical range Single supply, Single +5V Supply |
| ● Low power consumption, 180mA for one RF output at 5V supply voltage |
|
● Lead-free/RoHS compliant QFN4X4-24L package |
Variable Gain Amplifier AGC1011P
Sanland’s AGC1011P is a variable Gain Amplifier with digital Attenuator. The Amplifier has low noise and high linearity achieved through the use of 0.5um GaAs Enhancement-mode pHEMT process. It is housed in a miniature 4.0 x 4.0 mm 24-pin Quad-Flat-Non- Lead (QFN) package. It is designed for optimum use from 0.04GHz up to 1.2GHz. The compact footprint and low profile coupled with low noise, high gain and high linearity make the AGC1011P an ideal choice as a low noise amplifier for CATV network and FTTH network.
| 类型 | Downstream |
| 频率最小值(GHz) | 0.04 |
| 频率最大值(GHz) | 1.218 |
| 增益典型值(dB) | 37 |
| CSO(dBc) | -60 |
| CTB(dBc) | -60 |
| NF(dB) | 0.5 |
| 工作电压(V) | 5 |
| 工作电流(mA) | 135 |
| 封装类型 | QFN |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes or No |
Major Applications
Electrical Characteristics For Application:
| Parameter | Specification | Units | Notes | ||
| Min | Typ | Max | |||
| Freq | 0.04 | 1.218 | GHz | 40-1.218GHz | |
| Gain | 37 | - | dB | 40-1.218GHz | |
| Gain Control Range | 30 | - | dB | 0-24 | |
| CTB | 60 | - | dB | Test at Optical input Power -5dBm. 60 PAL-D channels DS22.OMI=3.5%per channel | |
| CSO | 60 | - | dB | ||
| CNR | 45 | - | dB | ||
| Output return loss | -15 | - | dB | 50-1.218GHz | |
| NF | 0.5 | 0.69 | dB | At 500MHz/5dBm | |
| VDD | 5 | V | |||
| IDD | 160 | 180 | 200 | mA | Vdd = 5.0V |
| Test CondiUons: VDD=5V, IDD=180mA Typ. OIP3 Tone Spacing=1MHz, Pout per ton=+5 dBm | |||||
| TL=25℃, ZL=75 Ohms | |||||
1. All measurements in a 75 Ohm system, unless otherwise specified.
2. Specified at maximum gain.
3. When the control voltage is changed, the attenuation is changed,Attenuation gain deviation is ±1.5dB
支持IPv6网络
